Post by dr.girlfriend on Apr 17, 2014 20:09:57 GMT -5
Aaargh! I'm trying to fit this IKEA cabinet door on with the Integral hinges. The IKEA instructions, naturally, just say "Click!" and that's it. I watched a few YouTube videos, and it looks like you have to slide a pin in to that little thing in the front, and then press down at the back. In the videos it just clicks on, but when I press on the back it clicks but then immediately pops off again. Any ideas?
Ok, so ... are you sure you're getting the pin into the slot?
If not, is your release lever stuck open somehow? (It's the little flappy thing on the underside.)
We didn't use IKEA cabinets, but the replacement door fronts that we used had similar hinges, and these were the problems we had. Mostly the release lever sticking open or just not fully clicking in. Had to make sure we manually closed it on some of them.
Oh and fyi - these kinds of hinges are totally adjustable... we spent a couple hours freaking out that we ordered the wrong size doors because some had gaps & some banged together (on the double door cabinets) to realize that.
I have no real helpful advice but wish you luck! I have a couple IKEA cabinets with doors and I fought with those darn things for days and was ready to give up when I got them to click in but honestly am not sure i could do it again.
Post by dr.girlfriend on Apr 18, 2014 9:06:31 GMT -5
Thanks, everyone. I'll try all these things tonight. Unfortunately it's the top door on the 80" pantry I'm trying to get into place, so it's so hard to balance on a stool and try to put pressure on it, etc. But I'll check the video and faceplate direction, and look for that release latch.
You are a lifesaver, that was exactly it! The illustration shows the faceplates on for a right-hinged door, I guess when I mentally rotated them for the left-hinged door I got them turned around front to back too. Thanks!