So I've done two coats of paint on a dresser I'm trying to redo with a paint brush. It looks like crap. 1) is it too late to switch to a roller? 2) do you have a roller brand you recommend? I should go with a foam one right?
Post by mrs.jacinthe on Jul 17, 2013 15:06:09 GMT -5
What kind of paint is it? Oil or latex?
I find that using a roller on furniture leaves a sort of "bumpy" surface. I prefer to either use floetrol with latex or oil paint, in order to prevent brush marks. How smooth do you want the surface? If you're wanting glossy-smooth, you'll have to sand it down again and use oil or a sprayer, most likely. Or just do a MESS of coats with the brush and consider it "vintage".
I'm using latex at the recommendation of the guy at SW. I did buy Floetrol but when I told him I was painting furniture he said that the paint formula he was suggesting wouldn't need it. BS. It's all streaky. I also started with a roller and got the "bumps" you speak of and it drove me nuts so out came the brush. Maybe I'll do a light sanding and do Floetrol. If not I'm just going to start splattering paint all over the dang thing and call it a day.
I'm using latex at the recommendation of the guy at SW. I did buy Floetrol but when I told him I was painting furniture he said that the paint formula he was suggesting wouldn't need it. BS. It's all streaky. I also started with a roller and got the "bumps" you speak of and it drove me nuts so out came the brush. Maybe I'll do a light sanding and do Floetrol. If not I'm just going to start splattering paint all over the dang thing and call it a day.
Oh no! Are you using the pro classic? I have a cabinet I'm planning to paint and when I asked at SW about floetrol to eliminate the brush marks I was told I wasn't necessary with the pain they were suggesting since it would self-level. ?Now I'm scared to try to pain the cabinet....
I'm using latex at the recommendation of the guy at SW. I did buy Floetrol but when I told him I was painting furniture he said that the paint formula he was suggesting wouldn't need it. BS. It's all streaky. I also started with a roller and got the "bumps" you speak of and it drove me nuts so out came the brush. Maybe I'll do a light sanding and do Floetrol. If not I'm just going to start splattering paint all over the dang thing and call it a day.
Oh no! Are you using the pro classic? I have a cabinet I'm planning to paint and when I asked at SW about floetrol to eliminate the brush marks I was told I wasn't necessary with the pain they were suggesting since it would self-level. ?Now I'm scared to try to pain the cabinet....
Must be. The guy told me the same thing about it self-leveling. But I am also a sloppy painter and it didnt' help that DS was trying to tear off the garage door to get outside to where i was painting. And I made the mistake of painting as the temperature outside was rising and it made the paint get tacky and hard to paint without the brush sticking
Oh no! Are you using the pro classic? I have a cabinet I'm planning to paint and when I asked at SW about floetrol to eliminate the brush marks I was told I wasn't necessary with the pain they were suggesting since it would self-level. ?Now I'm scared to try to pain the cabinet....
Must be. The guy told me the same thing about it self-leveling. But I am also a sloppy painter and it didnt' help that DS was trying to tear off the garage door to get outside to where i was painting. And I made the mistake of painting as the temperature outside was rising and it made the paint get tacky and hard to paint without the brush sticking
I'm hoping someone has a great recommendation for you/us. I've always had great luck with the advice from SW and am disappointed that this may not be the case this time around.
Post by mrs.jacinthe on Jul 17, 2013 16:17:38 GMT -5
I've had no trouble with proclassic self-leveling. But I'm not picky about brush marks, either.
I bet a lot was related to temperature and humidity. Also, I've had trouble with paint getting icky if I'm painting in direct sunlight. I think the sun warms up the piece and then the paint sort of "cooks" on. Can you try painting in the garage with the door open?