Sort of CR - Wainscoting

[hunniapple]

I also posted this on D&R over on the Nest, but I thought I would ask here as well in case anyone knows how to do this!

We're installing beadboard wainscoting in our guest bath. We have hung all of the paneling but we are stuck at what should be the next step. We still need to put the baseboad molding back on, as well as the top chair rail piece, and the pieces for the inside and outside corners (I guess this is called corner trim).

We're stuck because we cannot figure out how to make the corner trim fit flush with the chair rail piece and baseboard molding. We need these corner trim pieces on the inside and outside corners of the room to cover the raw cut edges of the beadboard in the corners of the wall. We know that the baseboard needs to align at a 45 degree angle, but we just can't figure out how the corner trim pieces fit.

We've tried googling, but no luck.

[MommaK]

Why do you need corner trim? How many outside corners are there?

Why not simply calk and paint?

[glitterfart]

I´m with MommaK on the caulking and painting!

[hunniapple]

Thanks ladies! Someone on home and harden also suggested this and we had not thought of it!