It's quiet here and I'm going to be a post while. I have a 2013 Elantra and I would really like to get 3 car seats in there and 2 of them rear facing bonus if I can use my keyfit22. What I currently have to work with: Keyfit22 2 diono radians (can't find my rearfacing bases, so haven't tried it but I'm ordering one so I can) 2 Grace myride 50 Britax roundabout
I can make it work if I do the key fit I the middle (inconvenient but doable) and turn both convertibles ffing, I'm not excited to turn dd2 ffing at 2, but she will be at least two. Dd1 is not ready for a booster, she's only 4.
Then I would first take all your seats outside with you and try various combinations. I'm pretty sure a RF radian and a FF radian puzzle well together. I would try a FF radian in the middle and a RF radian and RF keyfit on the sides. If you need to order another RF boot for the radian anyway, make sure you order an angle adjuster. That will really make it easier for whomever is in front of the RF radian!
If the radians don't work puzzled like that then try the myride or roundabout RF. I believe I also read at some point that the myride puzzles nicely with a radian if they're going in the same direction, so that's worth a try if none of the RF/FF combinations work.
Use seatbelts (and tether for the FF seat) to install the seats, not the LATCH system because usually the LATCH system puts things squarely in the center of the seat and you can get an extra inch or two by using the seatbelt. Also, when you install seats side by side they need to be independently tight (i.e., if one is removed the other can't suddenly be loose since it will fly loose in an accident even if it seems tight because of the other seat). The way techs generally recommend testing that is that you install one seat, once you get it tight you draw a line with a piece of chalk at the buckle where the seatbelt is tight enough. Then you remove that seat, install the other seat tightly and then put the first seat back in place pulling until the chalk mark is where it was. I would do the chalk trick with the middle seat, then install the two outboard, then reinstall the middle.
It's quiet here and I'm going to be a post while. I have a 2013 Elantra and I would really like to get 3 car seats in there and 2 of them rear facing bonus if I can use my keyfit22. What I currently have to work with: Keyfit22 2 diono radians (can't find my rearfacing bases, so haven't tried it but I'm ordering one so I can) 2 Grace myride 50 Britax roundabout
I can make it work if I do the key fit I the middle (inconvenient but doable) and turn both convertibles ffing, I'm not excited to turn dd2 ffing at 2, but she will be at least two. Dd1 is not ready for a booster, she's only 4.
I have no idea if this helps you but I have two Radian angle adjusters if you want them. Both are brand new and never used. Radian RXT.
It's quiet here and I'm going to be a post while. I have a 2013 Elantra and I would really like to get 3 car seats in there and 2 of them rear facing bonus if I can use my keyfit22. What I currently have to work with: Keyfit22 2 diono radians (can't find my rearfacing bases, so haven't tried it but I'm ordering one so I can) 2 Grace myride 50 Britax roundabout
I can make it work if I do the key fit I the middle (inconvenient but doable) and turn both convertibles ffing, I'm not excited to turn dd2 ffing at 2, but she will be at least two. Dd1 is not ready for a booster, she's only 4.
I have no idea if this helps you but I have two Radian angle adjusters if you want them. Both are brand new and never used. Radian RXT.
Let me check compatibility. Pm me what you want for them